About the MPI APL Product Sort By MPI Number Product Sort By Type
| MPI # 177 Epoxy, Semi-Gloss (MPI Gloss Level 5) | NEXT→ | ||
| A solvent based, semi-gloss, two component, epoxy coating specified for wall and floor surfaces in moderate to heavy traffic commercial and moderate industrial environments. Must be resistant to incidental splash and spillage of dilute (5%) sulfuric acid, (15%) hydrochloric acid, (20%) sodium hydroxide, gasoline and heavy duty cleaners and detergents. Used as a self-priming material on smooth, low porosity concrete, masonry and wood surfaces. On concrete masonry units (blocks) MPI #4 Latex (dry areas) or #116 Epoxy (damp areas) block fillers are used as the first coat. On ferrous and galvanized metals, a primer such as MPI #20 Epoxy Zinc Rich, #101 Epoxy Anti-Corrosive and #19 Inorganic Zinc rich primers. On non-ferrous metals MPI #80 Etch Type Primer is specified. This epoxy shall be able to be applied at temperatures ranging from 15° to 40° C and a maximum relative humidity of 80%. Application is generally by spray, but in areas where spray is impractical, a brush or roller may be used. | ||||
| MPI VOC Ranges (grams/L) | E3 <251 g/l | E2 251-420 g/l | E1 421-500 g/l | E '0' - outside range, n/a - unavailable |
| Default Filter▼ | OTC/EC filter▼ | Leed Filter▼ | GPS-1 Filter▼ | GPS-2 Filter▼ |
|---|
| Listing Mfr | Label | Product Name | Code | OTC/EC
|
Leed
|
EPR | GPS-1 | GPS-2
|
Region
|
|
|---|---|---|---|---|---|---|---|---|---|---|
| Benjamin Moore | Corotech | Polyamide Epoxy Semi-Gloss | V400-91 | 2 |
|
US/CA
|
||||
| Cloverdale Paint | High Performance | ClovaCoat 330 High Build Semi-Gloss Epoxy White | 8333 Series | 2 |
US/CA
|
|||||
| Sherwin-Williams | Protective & Marine | Macropoxy 646 Fast Cure Epoxy | B58W00610 | 3 |
|
US/CA
|
A subsidiary of AMPP
Dedicated to advancing the painting and coatings application industry through quality standards and quality assurance.
