About the MPI APL Product Sort By MPI Number Product Sort By Type
| MPI # 20 Primer, Zinc Rich, Epoxy | NEXT→ | ||
| A solvent based, two or three component, epoxy type anti-corrosive primer for cleaned new or repaired ferrous metal surfaces exposed to moderate industrial or marine environments. Must be top-coated to attain maximum protective qualities. Specified top coats include for interior surfaces MPI # 151,153 or 154 W.B. Light Industrial Coating (formerly MPI #110) or for exterior surfaces MPI #161,163,164 W.B. Light Industrial Coating (formerly MPI #110), MPI# 77 Cold Cure Epoxy and MPI # 98 and #108 High Build Epoxy. Minimum recommended surface preparation is SSPC SP-6 Commercial Blast, but in some repainting work, hand or power tool cleaning may be the maximum attainable. Application is primarily airless and conventional spray, but brushes or rollers may be used for small detail or touch-up work. | ||||
| MPI VOC Ranges (grams/L) | E3 <301 g/l | E2 301 - 350 g/l | E1 351 - 450 g/l | E '0' - outside range, n/a - unavailable |
 meets GPS-1 for Standard Category: Zinc Rich Primers  meets RG (OTC or EC) meets LEED 2009 (excluding LEED for schools) |
||||
A subsidiary of AMPP
Dedicated to advancing the painting and coatings application industry through quality standards and quality assurance.
